Table of Contents
Advertisement
On this page:
1. Specify whether you use Static or DHCP IP Addressing by marking the appropriate radio
2. For Static IP Addressing, also enter values for the following parameters:
•
•
•
Note
CyberData Corporation
button. If you select Static IP Addressing, go to
The V3 Paging Server's IP Address: The V3 Paging Server is delivered with a factory
default IP address. Change the default address to the correct IP address for your system.
The Subnet Mask.
The Default Gateway.
You must click on the Save button and then the Reboot button for the changes to take
effect.
Step
930427L
Setting Up the V3 Paging Server
Configure the Network Parameters
2.
Operations Guide
25
Advertisement
Table of Contents
Need help?
Do you have a question about the VoIP V3 Paging Server and is the answer not in the manual?
Questions and answers