Washing Procedure And Program Selection - Swann SW3010W Instruction Manual

WASHING PROCEDURE AND PROGRAM SELECTION

1. COTTON IS AUTOMATICALLY SELECTED UPON POWER ON
• Press the Power button to start.
• Press the Start/Pause button
• Initial condition
- Program : Cotton
- Wash : main wash
- Rinse : 3 times
- Spin : 800 rpm
- Water temperature : 40˚C
2. MANUAL SELECTING
• Press the Power button to start
• Select the conditions which you want to use by turning the program dial and pressing each button.
• Press the Start/Pause button.
3. DELAY FUNCTION
• You can delay the start of a wash cycle from 1 to 12 hours.
select the
program
or manual
* Each press of the "Delay/Start" button delays the start of a wash program by 1 hour.
• Now the reservation is made.
• If you want to check the selected program, press the "Start/Pause" button again.
• Preparing washing before starting "Time Delay";
- Turn on the water tap
- Load laundry and close the door
- Place the detergent and fabric softener in the detergent case.
• To cancel the time delay, press the Power button.
10