Table of Contents
Advertisement
SPEAKER CONNECTIONS
This amplifier can operate in one, two or three channel mode. The minimum impedance for single channel (bridged/mono) operation is 4 or 8 ohms. Tri
channel power is referred to stereo and mono at the same time. Minimum impedance remains the same for three channel (front / subwoofer) systems as long as
proper passive crossovers are used.
Connect right and left speaker wire to corresponding speaker output terminals of the amplifier. Be sure to have the positive wire from the speaker
connected to the positive speaker terminal of the amplifier and the negative wire from the speaker must connect with the negative speaker terminal of the
amplifier.
Reversing any of these connections will result in the speaker cones moving out of phase which causes bass cancellation. See Fig.3 Speaker Output
Connections.
Fig.3.
6
Advertisement
Table of Contents
