Table of Contents
Advertisement
CONNECTIONS
INPUT CONNECTIONS
· This amplifier will accept low level inputs. Low level is the same as line level. The low level signal is carried through RCA cables. It is preferred to use
low level inputs to the amplifier if the head unit is equipped with the low level outputs. If not, you can use a "high to low converter" available through
your local car audio shop.
· Connect the low level/line level RCA cables from the head unit, or signal processor, to the line level input on the amplifier. See Fig.2 system wiring
diagrams.
HIGH INPUT CONNECTIONS
Connect the HIGH LEVEL INPUT connector wires to the speaker level of the unit as in the diagram. Use #18 or thicker stranded, insulated hookup wire.
Fig.1
4
Advertisement
Table of Contents
