Table of Contents
Advertisement
Operating Your Camera
OFF : Not being used
3. Select a desired mode using the Function Setup switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
Notes
• B ecause there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• W hen dark, the HLC is only activated when a bright light exceeding a specific size. (In
NIGHT ONLY mode).
• T he HLC is not activated in day light or when bright light is not present at night. (In NIGHT
ONLY mode).
26
COLOR CCD CAMERA
HLC : Enable the user to change the level,
limit, mask color/tone and area.
User Guide
SSNR3
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup switch
so that the arrow indicates 'SSNR3' .
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the
noise reduction level.
Notes
• Y ou cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is
'OFF'.
• W hen adjusting the noise reduction level in the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced, as will the brightness of the image.
COLOR CCD CAMERA
DC
ATW
OFF
OFF
ON
COLOR
27
User Guide
Advertisement
Table of Contents
