Connecting The Power Cord - NEC DV11G User Manual

For video signal output
Set the dip switch 4 to ON.
Connect the Video image output terminal to the Video image input terminal of a TV or other image equipment.
1 2 3 4 5 6 7 8
1 2 3 4 5
Set dip switch 4 to ON.
NOTE:
• With dip switch 4 set to ON, the source selection 'EXTERNAL' cannot be selected.
Connection of a simple monitor
A simple monitor may be connected to the Monitor output terminal for use with RGB output or video signal
output.
1 2 3 4 5 6 7 8
Camera image is always being displayed, so that when replacing data, it is possible to see in advance whether the
next data, larger in size, will be within the display range or not.
NOTE:
• The display image on a simple monitor may be slightly wider in the horizontal direction than that of a projector or a
display.
• The display range may sometimes vary depending on the performance characteristics of a simple monitor or the type
of output signals. Please confirm the display position by actually displaying it by your projector or display.
• Trapezoidal correction function does not work.
• Image quality is lower than the image from the RGB monitor output terminal 1/2.
• Image quality may drop and the tone of color may change from the video output terminal.

Connecting the Power Cord

Connect the power cord to the AC IN terminal on the back panel, and connect the plug to the outlet.
Be sure to ground the equipment properly to ensure safety.
To avoid electric shocks, ask a professional to carry out the
grounding.
Be sure to make ground connection before connecting the
power plug to the outlet.
Also, when disconnecting the grounding, be sure to do so
only after disconnecting the power plug from the outlet.
6 7 8
Commercially available video cable or S-video cable
Commercially available video cable
CAUTION
E-13
TV or the like
Simple monitor
Insert fully.
AC outlet