Pc Mode - Advanced Osd Menu - jakob JH 23T01 MMD User Manual

PC MODE - ADVANCED OSD MENU

Part 2 - Available functions in PC MODE Advanced OSD Menu:
This part explains all the functions available for more experienced users.
Note that to be in PC MODE, a computer signal must be present in full screen, i.e Windows or other
operating system/radar system. Having a PIP view simultaneously will not interfere or change the menu
structure in any way.
- To acess this menu, press and hold the "DOWN" button while turning power on.
- On older BIOS Firmware below V1.2 you will have the advanced menu by default.
BRIGHTNESS AND CONTRAST:
Selecting this function will enable the user to adjust brightness and contrast
for the display.
BRIGHTNESS:
CONTRAST:
COLOR TEMPERATURE
Selecting this function will enable the user to modify the warmness of the picture.
Higher temperature = "cooler" picture. Lower temperature = "warmer" picture.
User can select between 9500K, 8000K, 6500K, and 5000K color temperature measured in
Kelvin degrees. Press "+" to access the sub-menu, where the RGB values can be adjusted.
Use "+" and "-" buttons to adjust these values, and "MENU" to exit. (Saving is done automatically)
FREQUENCY AND PHASE:
Selecting this function will enable the user to modify the image horizontal size and
fine tune the image quality.
FREQUENCY:
PHASE:
PICTURE TYPE
STATUS:
Selecting this function will display graphic information such as resolution and
frequency.
Increase/decrease brightness level, total: 100 steps
Use "+" or "-" buttons to adjust values.
Increase/decrease contrast level, total: 100 steps
Use "+" or "-" buttons to adjust values.
:
Increase/decrease the image horizontal size.
Use "+" or "-" buttons to adjust values.
Fine tune the data sampling position (adjust image quality.)
Use "+" or "-" buttons to adjust values.
: Motion / Still (Adjustment for best image quality)
If your graphics move a lot, select "Motion"
If your graphics are mostly still, select "Still"
8
Product:JH 23T01 MMD