Page 1
23.1” TFT JH 23T01 MMD - 23.1 inch Maritime Multi Display For 220 VAC and 12-24 VDC, including touchscreen versions. Jakob Hatteland Display AS Created : 11 Jul, 2001 Modified : 08 May, 2002 Created by: Stein Eikesdal Title : IND100016-1...
The controller and the high light intensity in combination with the high contrast and wide backlight adjustment control, allow the product to be used in many environments. Brightness is adjustable from 0 to 100% JH 23T01 MMD - 23.1 inch Maritime Multi Display CONTENTS: OPERATION................3 Power switch, Display Adjustment Controls, Power Light Dimming, Hotkeys..
This will enable the user to quickly adjust the brightness, image size, contrast or other functions to control the image. To assign these hotkeys, enter the “UTILITIES MENU/DIRECT ACCESS” menu and change them to the desired hotkey function. (page 9). Default hotkeys are set to increase/decrease contrast. Product:JH 23T01 MMD...
Note: On older products you will not have the simplified OSD menu structure, but a fully advanced OSD menu available. From BIOS Firmware V1.2x this have been separated into the simplified OSD menu and the advanced OSD menu for easier usage. See page 28 for information on how to determine your BIOS Firmware version! Product:JH 23T01 MMD...
Selecting this function will enable the user to position the image within the display area. IMAGE UP/DOWN : Position the image vertically using “UP” or “DOWN” buttons. IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons. Product:JH 23T01 MMD...
Page 6
Selecting this function will enable the user to select the type of input signal to show fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically. Product:JH 23T01 MMD...
Page 7
Selecting this function will exit the OSD menu. Press “+” to exit and save the current settings. Note: The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above) Product:JH 23T01 MMD...
: Motion / Still (Adjustment for best image quality) If your graphics move a lot, select “Motion” If your graphics are mostly still, select “Still” STATUS: Selecting this function will display graphic information such as resolution and frequency. Product:JH 23T01 MMD...
Page 9
Increase/decrease the tint of the image of the PIP window. Use “+” or “-” buttons to adjust values. COLOR: Increase/decrease the color of the image of the PIP window. Use “+” or “-” buttons to adjust values. Product:JH 23T01 MMD...
Page 10
Selecting this function will enable the user to select the type of input signal to show fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically. Product:JH 23T01 MMD...
Page 11
: Color Calibration. Press “+” to automatically adjust it. LOAD FACTORY DEFAULTS : Recall factory default settings. * By pressing the assigned hot key, the sequence of the selected input video source are: Analog RGB / Component / Video / Composite Video / S-Video. Product:JH 23T01 MMD...
Page 12
Selecting this function will exit the OSD menu. Press “+” to exit and save the current settings. Note: The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above) Product:JH 23T01 MMD...
: Position the image vertically using “UP” or “DOWN” buttons. IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons. ROTATION: Selecting this function will enable the user to rotate the image to either landscape or portrait format. Product:JH 23T01 MMD...
Selecting this function will enable the user to select the type of input signal to show fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically. Product:JH 23T01 MMD...
Page 15
Selecting this function will exit the OSD menu. Press “+” to exit and save the current settings. Note: The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above) Product:JH 23T01 MMD...
Page 16
: Motion / Still (Adjustment for best image quality) If graphics on screen move a lot, select “Motion” If graphics on screen are mostly still, select “Still” VIDEO TYPE : Change to best match the source signal. (DVD / VCR) Product:JH 23T01 MMD...
Page 17
: Position the image vertically using “UP” or “DOWN” buttons. IMAGE LEFT/RIGHT : Position the image horizontally using “+” or “-” buttons. ROTATION: Selecting this function will enable the user to rotate the image to either landscape or portrait format. Product:JH 23T01 MMD...
Page 18
Selecting this function will enable the user to select the type of input signal to show fullscreen. Available inputs are: Analog RGB, Component Video, Composite Video and S-Video. Pressing “+” will activate the input, and pressing “-” will detect automatically. Product:JH 23T01 MMD...
Page 19
Normal / Horizontal Inverse / Vertical Inverse / Inverse LOAD FACTORY DEFAULTS : Recall factory default settings. * By pressing the assigned hot key, the sequence of the selected input video source are: Analog RGB / Component / Video / Composite Video / S-Video. Product:JH 23T01 MMD...
Page 20
Selecting this function will exit the OSD menu. Press “+” to exit and save the current settings. Note: The OSD settings will also automatically be stored in memory when the OSD exit on user timeout (see above) Product:JH 23T01 MMD...
VGA cable connector. To reduce tension of the VGA cable, secure it to the base mounted cable tie clamp. Connect the other end of the cable to the VGA output of your computer, and fasten it there also. continues..Product:JH 23T01 MMD...
The power light indicator is controlled by the Auto Power LED Dimming function which automatically adjusts the intensity of the power light based on your environment lightning. You could also turn it off, if that is necessary. Product:JH 23T01 MMD...
+5V power supply for DDC (optional) Digital ground Reserved for monitor ID bit 0 (grounded) DDC serial data Horizontal sync or composite sync, input Vertical sync, input DDC serial clock TOUCHSCREEN D-SUB 9P CONNECTOR FEMALE: (optional) Pin Number: Description: Product:JH 23T01 MMD...
Sparkling on the display may be a faulty TFT panel signal cable. CONTINUED FAILURE: If unit after unit keeps failing, consider and investigate whether you are short circuiting the equipment or doing something else seriously wrong. Product:JH 23T01 MMD...
As the available functions are nearly indentical between older products and V1.2F2, there should be no critical need to update the BIOS Firmware. Touchscreen: For touchscreen usage, please visit our website for 3rd party software, drivers and documentation. Product:JH 23T01 MMD...