Video Mode - Simplified Osd Menu - jakob JH 23T01 MMD User Manual

VIDEO MODE - SIMPLIFIED OSD MENU

Part 3 - Available functions in VIDEO MODE Simplified OSD Menu:
This part explains all the most common functions available which are required for most users.
Note that to be in VIDEO MODE, a video signal must be present in full screen, i.e from a camera, VCR or
DVD player.
VIDEO ADJUSTMENT:
Selecting this function will enable the user to modify the color saturation of the
picture, tint and sharpness.
COLOR:
TINT:
SHARPNESS:
PICTURE TYPE
VIDEO TYPE
VIDEO SYSTEM:
Selecting this function will enable the user to select video system and input signals.
AUTO
NTSC / NTSC 4.43
PAL / PAL M
SECAM
POSITION:
Selecting this function will enable the user to position the image within the display
area.
IMAGE UP/DOWN
IMAGE LEFT/RIGHT : Position the image horizontally using "+" or "-" buttons.
ROTATION:
Selecting this function will enable the user to rotate the image to either
landscape or portrait format.
Increase/decrease video color level.
Use "+" or "-" buttons to adjust values.
Increase/decrease tint level.
Use "+" or "-" buttons to adjust values.
Increase/decrease video image sharpness level.
Use "+" or "-" buttons to adjust values.
: Motion / Still (Adjustment for best image quality)
If graphics on screen move a lot, select "Motion"
If graphics on screen are mostly still, select "Still"
: Change to best match the source signal. (DVD / VCR)
: Automatic detection of NTSC or PAL system. (Not applicable in SECAM)
: Manual select NTSC system.
: Manual select PAL system.
: Manual select SECAM system.
: Position the image vertically using "UP" or "DOWN" buttons.
13
Product:JH 23T01 MMD