Hughes BGAN Remote Antenna Installation Manual page 8

3. Attach the antenna feed cable to the rear of the modem terminal using the provided cable clamps in the
position detailed in figure 9a. Note there are two different size cable clamps to fit the varying thickness
in cable.
4. Carefully plug the SMA connector into the strain relief adapter as shown in figure 9b. Tighten the
connection by hand. Excessive force applied using a tool, could turn the adapter and damage the
internal antenna cable.
HUGHES is a registered trademark of Hughes Network Systems, LLC.
All other trademarks are the property of their respective owners.
© 2010 Hughes Network Systems, LLC. All rights reserved.
All information is subject to change.
Figure 9a – Attach antenna feed cable
Figure 9b – Insert SMA plug into adapter
Hughes Network Systems, LLC
11717 Exploration Lane Germantown, MD 20876 USA
bgan.hughes.com