Advertisement
ON A RISER: Install Riser Service Kit part number 35001258. This kit will replace
6.
the washing machine leveling legs mounting the washer to the Riser with 10 mm
bolts. The kit also includes the non-slip discs (211692), Dependable Care Washer
legs (22003428) to replace the legs on the Riser and washers to fit between the
Riser and the washer. The instructions also state to sit the washer/Riser into the
black rubber cups (35001259), which were shipped with the Riser originally. See
kit instructions for more details, especially if bolts were used to mount the washer
to the riser.
Check the dynamic absorbers on
7.
top of the washer to ensure the
correct absorber assembly is
present or if any of the weights are
loose.
Is unit installed on a "Soft" floor? Screw down a 3/4" plywood panel to the floor
10.
under the washer. This will stiffen the floor under the washer and reduce the
vibration or walkin
g.
8.
Remove the front panel and check the color of the
plastic damper inserts. [Gray (front), Green (rear)].
Replace or reposition if necessary.
9.
Check the
tightness of the
damper bolts to
ensure they are
not loose.
3
Advertisement
