FUNAI DR-D2831 Service Manual page 14

< Method 2 >
Note: When servicing, do not touch white resin part
as shown below.
1. Remove the Top Cover, the Front Assembly and
the DVD Mechanism & DVD Main CBA Assembly.
Then, remove the DVD Mechanism Unit.
2. Remove two screws, and remove the Insulating
Plate.
Insulating Plate
3. Release two Locking Tabs, and lift up one side of
the Clamper Assembly.
Clamper Assembly
Screw
Do not touch!
Locking Tabs
1-5-4
4. Release the other side of two Locking Tabs, and
remove the Clamper Assembly.
Clamper Assembly
Locking Tabs
5. Remove the disc.
Disc
E68C9DC