Operating Modes; Data Streams - Lexmark C540n Service Manual

5025-2xx, 4xx

Operating modes

Mode
Normal
Quiet
Eco-Mode (Off is default):

Data streams

✔
—Supported
✘
—Not supported
Data streams
PCL 6 emulation
PostScript Level III emulation
Version 3011 of the Adobe definition of
PostScript 3 is supported.
PDF
Supports version 1.6
PPDS
By default, the PPDS interpreter is inactive.
A user can activate the data stream by PJL
or by the PPDS Emulation setting in the
Configuration Menu.
PictBridge
Directimage
Devices that support Directimage support
all of the following graphics formats: TIFF,
TIF, JPEG, JPG, GIF, PNG, BMP, PCX,
and DCX.
Host-Based Printing (HBP)/Graphics
Device Interface (GDI)
Version 3 (color) uses PCL XL.
1-4
Service Manual
Description
Factory default
Designed for customers where noise levels are a very important
factor.
• Print quality is maintained at factory default level.
• Speed is reduced.
Designed for customers where the environment is a key factor.
There are three options; Energy, Paper, and Energy/Paper.
• Paper • Duplex is on if Energy/Paper or Paper is selected (duplex
models only) (can be overwritten by the driver).
• Energy • Print quality is maintained.
• Power Saver is set to one minute.
• Fuser standby is off.
• The operator panel back light is off.
• Power supply energy consumption is reduced.
• Energy + Paper All of the above.
Lexmark C540n, Lexmark C544n,
C543dn C544dn, C544dwn
✔ ✔
✔ ✔
✘ ✔
✘ ✔
✘ ✔
✘ ✔
✔ ✔
Lexmark C546dtn
✔
✔
✔
✔
✔
✔
✔