Connecting More Than Two Computers To The Cable Modem - THOMSON THG520 User Manual

Chapter 1: Connections and Setup

Connecting More Than Two Computers to the Cable Modem

If you need to connect more than two computers or if you need to connect two computers, but
USB is not available, you'll need the following additional equipment:
Crossover-wired, or "null," category 5 Ethernet cable for the cable modem to be connected
to the hub
10BaseT or 100BaseT Hub or Switch
Straight through, or standard, category 5 Ethernet cable (one for each computer to be
connected)
If you have a hub with an uplink port*, a straight through cable can be used in combination with
that port in lieu of the crossover cable.
*An uplink port has a small switch on it to change the polarity of the connection. It can accept
either a crossover or a straight cable, depending on the setting.
Note: You may need to check with your service provider in order to connect multiple computers.
24
Standard Ethernet cables
(one supplied)
Fig.4: Ethernet Hub Connection
Null Cable (not
supplied)
Ethernet Hub