Software Updating - Sharp LC-32FH500E Service Manual

LC-32FH500
LC-32FH510
1. Introduction
1. In order to proceed with the Software Updating do not enter into Service Mode.
2. The TV should be in normal operation (ON).
2. Procedure
1. Insert the USB memory into the USB terminal with the fi le name "MERGE.bin" on the root directory.
2. Press "MENU".
• "PICTURE" menu appears on screen.
3. Press "►" until selecting "OPTION" menu.
4. Press "▼" until selecting "Software update (USB) Sharp v*.*".
• The current software version is displayed.
5. Press "OK"
• "Are you sure? Yes - No" message is displayed.
6. Press "◄" until selecting "Yes".
7. Press "OK".
• The software update process starts.
• "Software upgrading... **%" message appears.
• The upgrading process is fi nished, the LCD-TV restarts.
8. Remove the AC cord and plug it again.
9. Return to OPTION menu to check that the version has been updated successfully.
NOTE:
If the TV is switched off during the upgrade process, when it gets to switched on again, the Power LED fl ashes:
Orange for 130 ms and green for 1.5 s, with black screen until it is detected in the USB connector a fi le "marge.
bin." Then the power LED will fl ash:
Orange for 40 ms and green for other 40 ms, with black screen while the new software is uploaded.
Once the process is completed, the TV set will start automatically.

SOFTWARE UPDATING

28