Software Updating - Sharp LC-37GA5E Service Manual

How to update VCTi Software
Hardware requirements
To update VCT it is needed:
1. A converter from Parallel port to DB9 supplied by Micronas, a male DB9 to female DB9 wire and the updating
tool (Part Code: CKIT-0002WJV0).
2. Make the connections as indicated below.
2.1. Connect Parallel cable from the updating tool to the PC.
2.2. Connect the long cable from the updating tool to the P2005 connector (LCD Controller PWB).
2.2
Software requirements
A complete Visual I2C (VI2C) installation consists of 4 software components:
1. Visual I2C main program ('visuali2c.exe' and several DLL files)
2. Several DALs: These are IC specific low-level access drivers for the I2C bus.
3. A Windows port driver (LPT or USB). There are three versions for Win9x and WinNT/2000/XP.
4. One or more applications ('*.vi2c'). They're representing the interface to the user.
Software preparation
Access to folder:
-D:\SOFTWARE UPDATE GA5\Installation order VCTi\1
-Install Visual I2C (SETUP_VISUAL_I2C_V3_1_7C.EXE)
It's strongly recommended to accept the suggested default folder.

SOFTWARE UPDATING

2.2
2.1
2.2
21
2.1
2.2
LC-26GA5E
LC-37GA5E
LC-32GA5E