Table of Contents
Advertisement
fig. 12
8
Lightly step on the back of the scrubbing head to
release the handle.
WARNING: Never stand on the Sonic Duo+
9
Press the Spray Button to apply solution onto
the carpet that is to be cleaned. (Fig. 12) A
continuous spray should be used while going
forward, then back.
NOTE: The first time that you use the Sonic
Duo+
there may be air in the system causing
™
a delay for the solution to come out of the spray
nozzle. Hold the spray button down for 5 to 10
seconds until you see the solution come out.
10
Using the same back and forth motion, clean
over the same area 3-4 times without spray.
Repeat until the entire carpet surface has been
cleaned. No rinsing is required.
11
If the Reusable Bottle is empty, you can refill
it at any time as long as the Sonic Duo+
unplugged from the outlet.
12
Once finished, step on the tag of the Carpet/
Rug Cleaning Pad and lift the unit to remove
the Carpet/Rug Cleaning Pad from the Sonic
Duo+
. (Fig. 13) Let the carpet dry thoroughly
™
and then vacuum.
fig. 13
Frequently Asked Questions
Q. My area rug has a rippling effect on the edges?
.
™
A. Wool area rugs have a rippling effect on the
edges after cleaning. This will relax out after
a few days of regular wear and usage.
Q. After using the Low Moisture -No Rinse- Carpet
Shampoo, my carpet feels dry and crunchy.
A. You likely used too much of the Low Moisture
-No Rinse- Carpet Shampoo. The dry, crunchy
feeling will dissipate after a few days of
normal wear and usage. To avoid this from
happening again, we would recommend using
less. Try not to use more than 1 bottle of
diluted solution per 24m
Q. I have tough stains on my carpet?
A. Use the Bonus Carpet Scrub 'n Stain Removal
Pad to remove your toughest stains quickly
is
™
and easily. First pretreat the area with the
Activating Pretreater Carpet Stain & Odor
Remover and wait for several minutes. Then
go over the spot with the Carpet Scrub 'n
Stain Removal Pad and the Low Moisture -No
Rinse- Carpet Shampoo.
.
2
5
Advertisement
Table of Contents
