9. To protect against a risk of electric shock, DO Eye irritant. Should some of the Shark ® NOT immerse the appliance into water or any branded cleaners and polishes be rubbed or other liquids.
Do not use on wood or tile floors that are highly better performance. worn, unfinished or have a wax or oil finish. 20. DO NOT mix other cleaners with Shark ’s ® Surfaces that have been treated with wax or...
Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace. This manual covers model numbers: KD451T 26 TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz.
Contents Thank you for Getting Started ....................2 purchasing the Using Your Sonic Duo Carpet, Wood & Hard Floor Cleaner ......4 ™ Shark Sonic ® Cleaning Your Carpets ..................4 Carpet, ™ Cleaning Your Hard Floors ................6 Wood & Hard Floor Polishing Your Hard Floors ................
When assembling your Sonic Duo there may be a little water in the Reusable Bottle. This is because we test ™ all of our products 100% before you buy them, so you get a quality Shark Sonic Duo Carpet, Wood & Hard ®...
Use hear it “click” into place. (Fig. 1) ONLY diluted Shark ’s Low Moisture - No ® Hold the power cord and wrap it around the cord Rinse - Carpet Shampoo or Wood &...
Carpet, Wood & Hard Floor Cleaner ™ IMPORTANT: Always check with the carpet manufacturer or distributer before using the Shark ® Activating Pretreater Stain & Odor Remover or the Low Moisture -No Rinse - Carpet Shampoo. To determine the colorfastness of any...
Carpet/Rug Cleaning Pad from the Sonic . (Fig. 11) Let the carpet dry thoroughly ™ and then vacuum. Visit www.sharkclean.com for other great quick cleaning products to complement your Sonic , such as the Shark Rotator vacuums. ™ ® ™...
“Solution Fill Line” to avoid foaming and to ensure accuracy. Visit www.sharkclean.com for other great quick cleaning products to complement your Sonic Screw the bottle cap on tightly and insert the , such as the Shark Rotator vacuums. ™ ®...
Page 11
fig. 18 Frequently Asked Questions Q. My Sonic Duo™ leaves a foam on hard floors. A. The Sonic Duo ™ Hard Floor Cleaning Pad is likely too saturated. Replace it with a clean, dry pad. fig. 19 Q. My floors appear cloudy after cleaning. A.
Pad by hand. (Fig. 22) polish over the floor. One bottle is enough to cover 425 square feet. (Fig. 21) NOTE: Depending on the amount of traffic your floors sustain, Shark recommends polishing ® NOTE: The 16 oz. polish bottle include with every 2 months.
Page 13
Surfaces that have Q. I accidentally ran the Shark Wood & Hard Floor ® been treated with wax or some no wax floors...
Page 14
Using Your Sonic Duo Carpet, Wood & Hard Floor Cleaner - cont. ™ Consumption Hard Floor Cleaning Pad Replace after 20 washes Hard Floor Polishing Pad Replace after 20 washes Carpet/Rug Cleaning Pad Replace after 20 washes Cleaner Consumption / Usage Wood &...
NOTE: Please note that the Hard Floor Polishing Pad or Hard Floor Polishing Pad from the unit. Pad must be rinsed immediately after use and before Store the Shark Sonic Duo in the upright being machine washed with the other pads.
Ordering Replacement Parts To order additional parts and accessories, feel free to contact us at www.sharksonicduo.com or call 1-800-798-7398. NOTE: Some parts may be available at your local retailer. Contact customer service for any other servicing. PART PART NO. 1 Hard Floor Cleaning Pad P131WHF 2 Wood &...
Troubleshooting Guide PROBLEM POSSIBLE REASONS & SOLUTIONS 1. The Reusable Bottle is not firmly inserted into the unit. Make sure that you hear an audible Sonic Duo is squirting ™ “Click” when you insert the Reusable Bottle into the appliance. foam from the spray nozzle.
SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. Product Registration Please visit www.sharksonicduo.com or call 1-800-798-7398 to register your new Shark product ® within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.