Tesla Model S Owner's Manual page 49

Headlight High Beams
Push the left-hand steering column lever away
from you. To cancel, pull the lever toward you.
If Model S is equipped with Driver Assistance
features, you can set the headlights to
automatically switch to low beam when there
is light detected in front of Model S. To turn
this feature on, touch Controls > Auto High
Beam.
Note: Your chosen setting is retained until you
manually change it. It can also be saved in
your driver profile.
In situations where high beams are turned off
because Auto High Beam is turned on and
light is detected in front of Model S, you can
temporarily turn high beams on by pulling the
lever all the way toward you.
The following indicator lights are visible on
the instrument panel when high beams are
turned on:
High beams are turned on, and
either the vehicle is not equipped
with Auto High Beam, or Auto High-
Beam is turned off.
High beams are currently turned on,
and Auto High Beam is ready to turn
off the high beams if light is
detected in front of Model S.
High beams are temporarily turned
off because Auto High Beam is on
and is detecting light in front of
Model S. When light is no longer
detected, the high beams
automatically turn back on.
To flash the headlight high beams, pull the
lever fully toward you and release.
Warning: Auto High Beam is an aid only
and is subject to limitations and system
issues. It is the driver's responsibility to
make sure that the headlights are always
Driving
adjusted as appropriate for the weather
conditions and driving circumstances.
Lights
49