Table of Contents
Advertisement
Bass expander system
WHAT TO DO IF ...
Press the BASSXPANDER
button to enhance the bass sound. "BASS
If the operation of the unit or display is not normal or when all the memory
appears on the display.
contents are to be cleared, disconnect the mains lead from the AC outlet,
The initial setting of this function is ON.
then press the RESET button (rear of the unit) for 30 seconds or more.
Selecting the sound mode
Press the SOUND PRESET button toselectthesound
mode matching the
music to be listened to.
POP: Pops, etc.
ROCK: Rock music, etc.
CLASSIC:
Classical music, etc.
JAZZ: Jazz. etc.
%
RESET
—-
I
CD PLAY
.,
Use compact
discs bearing
the symbol shown below. In addition
to
6.
conventional
12 cm CDs, this system can be used to play 8 cm CDs without
an adarXer.
~uwd
DIGITAL AUDIO
Note:
Do not touch the disc tray while it is moving.
Never place anything except a compact disc on the disc tray. Foreign
objects can damage the unit.
Do not apply excessive force to the disc tray.
Discs must be placed on the disc tray one at a time.
If discs are loaded, you can turn the unit on and begin play immediately
by pressing the E/11, DISC 1, DISC 2 or DISC 3 button.
7.
1.
Select "CD''function
by pressing the FUNCTION button. "CD" appears
onthedisplay,
then "CD"is replaced by ''dlSC". 'rl''discnumber
blinks.
-
2.
Press one of the disc select buttons (DISC 1, DISC 2 or DISC 3), then
press the OPEN/CLOSE
button.
Press one of the disc select buttons (DISC 1, DISC 2 or DISC 3).
The selected disc indicator blinks.
TR
>~
-'~
l—l
l—l
I
~
!
l_l
u
I
"›"
appears, and play starts from the first track of the selected disc.
The track number and elapsed playing time for the current track are
displayed,
If the desired disc number has been selected, the
/11button can
also be used to start play.
Note:
If the disc is loaded with the label facing downward,
or if a badly
scratched disc is loaded, "NO dlSC" appears on the display.
If this occurs, load the disc correctly or replace the damaged disc.
Press the 9 button to end disc play.
When the last track of the last disc has been played, the player stops
automatically.
When the OPEN/CLOSE
button is pressed during play, play will stop
and the disc tray will slide out.
If the changer
mechanism
has detected "no disc" for the disc
Ejecting or replacing discs
select button pressed, the tray slides out automatically.
1.
While in the CD play or stop mode, press one of the disc select buttons
The selected disc tray slides out. "OPEN" appears and the selected
to be ejected, then press the OPEN/CLOSE
button.
disc number blinks on the display.
While the player is playing one disc, you can eject or replace
3.
Place the disc with the label facing up on the disc tray.
another disc without stopping play.
3.
Press the OPEN/CLOSE
button.
'a
'*
2Rem0ve0rrep'acethed'sc"
Notes on handling compact discs
For 12 cm CD
For 8 cm CD
4.
Press the OPEN/CLOSE
button again to close the disc tray.
Note:
To open or close the disc tray, be sure to use the OPEN/CLOSE
button. Do not touch the disc tray by hand.
5.
Repeat steps 2-4
to load another disc.
Do not expose the disc to direct sunlight,
high humidity
or high
temperatures
for extended periods of time.
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals
such as record cleaning
sprays,
antistatic
sprays or fluids, benzene or thinner to clean compact discs.
8
Advertisement
Table of Contents
