Table of Contents
Advertisement
Eiii
EFORE ~G
..—. ... ."". -----
Recording copyright material without permission of the copyright
owners
is usually
an infringement.
If you wish to re-record
copyright
material,
permission
from the copyright
owner
is
necessary.
SANYO
does not approve
of, and cannot be held
responsible
for, any unlawful use of this machine.
Use deck B for recording.
Accidental
erasure prevention
tabs (for protecting
valuable recordings)
~
Si~e B
Accidental erasure can be prevented by breaking out the tabs on the end
of the cassette tape (where the tape is not exposed) using a screwdriver
Break out tab A for side A.
or similar implement.
Break out tab B for side B.
If a tab is broken out in error and you wish to re-record the tape, simply
block the tab hole using adhesive tape and the tape can be used for
recording again.
RECORDING
-
Recording compact discs (Synchronous
recording)
1.
2.
3,
4.
5,
6.
Load a b~ank cassette into deck B.
Select "CD".
Load the disc(s) to be recorded.
For programmed
recording, programme the material in advance
(as described under "PROGRAMMED
PLAY").
Press the disc select button (DISC 1, DISC 2 or DISC 3) to select the
disc to be recorded first, then press the
button. Select the track
number to be recorded if required.
For programmed
recording, this step is unnecessary.
Press the REC button on deck B. The PLAY button is engaged
simultaneously
and CD recording
starts. "REC" appears
on the
display
Press the STOP/EJECT
button on deck B to stop recording. Also the
CD player stops automatically.
When the end of the tape is reached, the CD player and deck B stop
automatically.
Recording from the tuner or video input
1.
Tune in the radio station to be recorded, or play a video cassette or
video disc.
2,
Load a blank cassette into deck B.
3.
Press the REC button to start recording.
4.
Press the STOP/EJECT
button to stop recording
When beat interference
is heard
A high-pitched noise called "beat"is sometimes heard during the recording
of radio broadcasts.
If this occurs,
1.
Press the MEMORY button.
2.
While "PROG. " is blinking, press the
F/ FM button to select '(be-l"
or "be-2. Select the setting that gives the best results.
1.
Load the cassette to be played back into deck A and a blank cassette
into deck B.
2,
Select "TAPE".
3.
Set the cassette in deck A to the point where recording will begin.
4.
Select the dubbing speed with the HIGH SPEED DUBBING button.
High speed dubbing ("HI SPEED
appears on the display):
For dubbing the tape at high speed (twice normal speed).
Normal speed dubbing ("HI SPEED
disappears):
For dubbing while monitoring at normal speed.
5.
Press the PAUSE button on deck B.
6.
Press the REC button on deck B.
7,
Press the PLAY button on deck A to starl dubbing.
8.
To stop dubbing, press both STOP/EJECT
buttons.
Do not change the dubbing speed during the dubbing operation
Automatic stop during dubbing
If deck B stops automatically,
deck A continues
playback mode at
normal speed.
If deck A stops automatically,
deck B erases the tape to the end.
12
Advertisement
Table of Contents
