Fast Forward And Rewind - Sanyo DC-F21 Instruction Manual

Mini component system
Table of Contents

Advertisement

ml
,,
,LIS-G
,T~,
".-. .
Deck A is for playback only; deck B is for both playback and recording.
1.
2.
3.
4.
5,
Select "TAPE.
"TAPE
appears on the display.
Press the STOP/EJECT
button to open the cassette holder.
Load the cassette(s).
I
I
1
I
~~
DECK B
DECK A
After the cassette has been loaded, push the cassette holder back into
position,
Press the PLAY button (Deck A or Deck B) to begin playback.
Press the STOP/EJECT
button to stop playback at any time. Press it
again to remove the cassette.
When the end of the tape has been reached, automatic stop will be
activated.
Note:
Endless tapes cannot be used.
Do not use C-120 tapes. They may jam in the mechanism.
Pause (Deck B)
Press the PAUSE button to temporarily stop playback or recording. Press
it again to resume operation.
Fast forward and rewind
Press the F FWD or REW button.
When the tape has been wound to the end, the deck stops automatically.
Note:
While playing or recording, do not press the F FWD or REW button of the
other deck, or the sound quality may deteriorate.
Sequential
playback (From deck A to deck B)
1.
Press the PLAY button on deck A. Deck A playback will begin.
2.
Press the PAUSE button on deck B.
3.
Press the PLAY button on deck B. Deck B enters the pause mode.
When the tape automatically
stops on deck A, deck B playback will
begin.
When the end of the tape has been reached on deck B, automatic stop
will be activated.
10

Advertisement

Table of Contents
loading

Table of Contents