Audio Adjustments; Introduction Of Audio Adjustments; Compensating For Equalizer Curves (Eq-Ex) - Pioneer DEH-P5750MP Operation Manual

Audio Adjustments

Introduction of audio
adjustments
5 4 3
1 Audio display
Shows the audio adjustments status.
2 CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
3 SW indicator
Shows when the subwoofer output is turned
on.
4 EQ-EX indicator
Appears in the display when EQ-EX function
can be activated.
5 Loudness indicator
Appears in the display when loudness is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
Fader (balance adjustment)EQ (equalizer
curve adjustment)Bass (bass and treble
level adjustment)LOUD (loudness)Sub W.
(subwoofer on/off setting)/Non FAD (non fad-
ing output on/off setting)80Hz: 0 (subwoo-
fer setting)/Non FAD (non fading output
setting)HPF (high pass filter)SLA (source
level adjustment)
1
2
# If EQ-EX function has been selected and only
when EQ-EX is turned on and Custom is selected
as the equalizer curve, you can switch to Bass.
# When the subwoofer controller setting is only
Preout:FUL, you cannot switch to Sub W. (Refer
to page 39.)
# You can select the 80Hz: 0 only when subwoo-
fer output is turned on in the Sub W.
# When the subwoofer controller setting is only
Preout:FUL, you can switch to the nonfading out-
put on/off setting. (Refer to page 39.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Compensating for
equalizer curves (EQ-EX)
The EQ-EX function smoothes the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
Custom curve is selected.
% Press and hold SW to turn EQ-EX on.
EQ-EX:ON appears in the display. EQ-EX is
now on.
# To turn EQ-EX off, press and hold SW.
# If you do not operate the EQ-EX within about 8
seconds, the EQ-EX function is cancelled auto-
matically.
Section
08
31
En