Introduction Of Advanced Built-In Cd Player Operation; Repeating Play; Playing Tracks In A Random Order; Scanning Tracks Of A Cd - Pioneer DEH-P5750MP Operation Manual

Section
05 Built-in CD Player
Introduction of advanced
built-in CD player operation
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat play is turned on.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Repeat (repeat play)Random (random play)
Scan (scan play)Pause (pause)COMP
(compression and BMX)FF/REV (search
method)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.

Repeating play

Repeat play lets you hear the same track or
disc over again.
1 Press FUNCTION to select Repeat.
Press FUNCTION until Repeat appears in the
display.
14
En
1
2
2 Press c or d to select the repeat range.
This switches you to the selected setting.
! Repeat:DSC  Repeat the current disc
! Repeat:TRK  Repeat just the current track
Note
If you perform track search or fast forward/re-
verse during Repeat :TRK, the repeat play range
changes to Repeat :DSC.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select Random.
Press FUNCTION until Random appears in
the display.
2 Press a to turn random play on.
Random :ON appears in the display. Tracks
will play in a random order.
3 Press b to turn random play off.
Random :OFF appears in the display. Tracks
will continue to play in order.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
2 Press a to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track is played.