Section 6: Features & Benefits; Rtr10 Series Rotary Tiller - Land Pride RTR15 Operator's Manual

Section 6: Features & Benefits
Section 6: Features & Benefits
Features
American made
Reverse tilling action
Tractor HP range
Gearbox Warranty
Working widths
6 1/2" Digging depth
Plate steel upper hitch
Clevis lower hitch
Hitch offset capability
Offset Dimensions42" Width
50" Width
58" Width
Fits Land Pride Quick-Hitch
Adjustable parking stand
Adjustable skid shoes
Formed and reinforced rear
deflector
Front deflector
4 'C' shaped heat-treated
tines per flange
1 3/4" Solid steel rotor shaft
15" Rotor swing diameter
Double lip seal on rotor bearing
Fully shielded shear pin or
slip-clutch driveline
#80 Drive chain enclosed in oil
bath
Stamped chain cover
30 RTR10 & RTR15 Series Rotary Tillers 311-431M
Table of Contents

RTR10 Series Rotary Tiller

Many tillers are imported. American made means better parts availability.
Reverse action 'sucks' tiller into ground, does not walk on top of hard ground like
forward rotation tillers can.
17-25 HP
5 Years on housing, seals, & bearings. shows our confidence in the product.
42", 50", 58" to meet specific customer needs.
For deep soil penetration.
Plate steel is stronger than flat bar type hitch.
Provides additional strength and easy one person hook-up.
Offset by moving lower hitch points to cover right tire track.
16" - 26" Std. 13" - 29" Max. Right
25" - 25" Std. 18" - 32" Max. Right
29" - 29" Std. 22" - 36" Max. Right
Allows for quick and easy one person hook-up.
(Offset cannot be used with Quick-Hitch.)
Allows for easy hook-up and storage.
Control depth with seven adjustments.
Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
Adjustable deflector allows for various finish results.
Front deflector is flexible to take the beating from rocks or debris.
'C' Shaped tines require less HP to move through the ground.
Solid steel shaft for strength.
For deep tilling and turning the soil over faster.
Double lip seal helps keep the dirt out and the grease in.
Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves
having to replace shear-pins.
Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped forming gives the chain cover strength.
Benefits
23" - 19" Max. Left
32" - 18" Max. Left
36" - 22" Max. Left
11/01/11