Makita HR3000C Instruction Manual page 10

1
003246
Reinstall the crank cap and tighten with the hex wrench.
Connect the connector and reinstall the handle.
003248
CAUTION:
Do not tighten the crank cap excessively. It is made
•
of resin and is subject to breakage.
Be careful not to damage the terminals or lead
•
wires especially when wiping out the old grease or
installing the handle.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
SDS-Plus Carbide-tipped bits
•
Bull point
•
Cold chisel
•
Drill chuck assembly
•
Drill chuck S13
•
Chuck adapter
•
Chuck key S13
•
Hammer grease
•
Bit grease
•
Depth gauge
•
Blow-out bulb
•
1. Hammer grease
1. Connector
1
2. Black
3. White
2
3
or attachments
Only use accessory or
Dust cup
•
Safety goggles
•
Plastic carrying case
•
are
10