Charging Battery - SoftBank 104SH User Manual

14
Lithium-ion Battery
This product requires a lithium-ion battery. Lithium-ion
batteries are recyclable. To recycle a used lithium-ion
battery, take it to any shop displaying the symbol below.
・To avoid fire or electric shock, do not short-circuit or
disassemble Battery.
Battery Usage Notes
General
Charge Battery at least once every six months; uncharged
Battery may die or affect files/settings.
Battery Life
Replace Battery if operating time shortens noticeably.
・Depending on usage, bulges may appear near end of
battery life; this does not affect safety.
Maintenance
Clean battery terminals and charging terminals with dry
cotton swabs.
Battery Cover
To maintain water/dust resistance, close Battery Cover
properly. Do not apply excessive force to Battery Cover;
damage may result.
・If Battery Cover is damaged, replace it with a new one.
Use of damaged Battery Cover may cause electric shock,
Battery corrosion, etc. due to water seepage. (Battery is
not water or dust proof.)
Handling Battery Tab (Printed PULL)
Do not apply excessive force; if Battery Tab rips off and
Battery cannot be removed, contact a SoftBank Shop.

Charging Battery

Battery must be inserted in handset to charge it.
AC Charger
Use Micro USB Charging Adapter with AC Charger ZTDAA1
(sold separately).
・AC Charger and Micro USB Charging Adapter are not water
or dust proof. Do not charge Battery while handset is wet.
Insert Charger connector into Micro USB Charging Adapter
・Confirm Charger connector orientation, then insert Charger
connector until it clicks.
Insert Micro USB Charging Adapter into External Device Port
・Use notch below Port Cover to open it. Gently fold back
Port Cover using hinge; do not pull/twist Port Cover.
・Insert Micro USB Connector with tabs (○) on slot side
facing up.
Extend blades and plug AC Charger into AC outlet
Notification Lamp illuminates while charging.
・Notification Lamp goes out when Battery is full. Unplug
AC Charger and retract blades. Remove Micro USB Charging
Adapter and close Port Cover.