Battery Installation - SoftBank 104SH User Manual

Battery Installation

Inserting Battery
Remove Battery Cover
・Use notch (○) to lift Battery Cover.
Insert Battery
・With Battery Tab facing up, align Battery terminals with
charging terminals.
・Take care not to get Battery Tab caught between base and
Battery Cover.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.
Removing Battery
Power off first.
Remove Battery Cover
・Use notch (○) to lift Battery Cover.
Remove Battery
・Take hold of Battery Tab (printed PULL) and gently lift
Battery as shown.
・Fold back Battery Tab to black area; may get caught
between base and Battery Cover upon replacing Battery
Cover.
・If Battery Tab rips off and Battery cannot be removed,
contact a SoftBank Shop.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.
13