Charging Battery - SoftBank 009SH Y User Manual

Charging Battery

Battery must be inserted in handset to charge it.
AC Charger
Use Micro USB Charging Adapter with AC Charger ZTDAA1
(sold separately).
Insert Charger Connector into Micro USB Charging Adapter
・Confirm connector orientation, then insert connector until it
clicks.
Open Port Cover and connect Micro USB Charging Adapter to
External Connector Port
・Pull hinge (not Cover edge) to open Port Cover; pulling the
edge may cause breakage.
Extend blades and plug AC Charger into AC outlet
Notification Lamp illuminates while charging.
・Notification Lamp goes out when battery is full. Unplug
AC Charger and retract blades. Remove Micro USB Charging
Adapter and close Port Cover.
USB Charge
Connect handset to a PC via Micro USB Cable.
・Power on handset and PC first.
・ Enable
USB battery charge .
・To use Fast transfer mode, install USB Cable driver on the
PC beforehand.
・Battery may not charge or charge slowly depending on PC
status/environment. Battery may not charge if SD Card is
not inserted.
Open Port Cover and connect Micro USB Cable to External
Connector Port
・Pull hinge (not Cover edge) to open Port Cover; pulling the
edge may cause breakage.
Connect Micro USB Cable to PC USB port
Notification Lamp illuminates while charging.
・Notification Lamp goes out when battery is full. Remove
Micro USB Cable and close Port Cover.
Charging Precautions
Handling Cords
Do not pull, bend, or twist the cord.
Important USB Charge Usage Note
Handset may power on automatically when connected to a
PC via Micro USB Cable; avoid connection aboard aircraft or
in hospitals, etc. where handset use is prohibited.
15