Charging Handset - SoftBank 200SH User Manual

16
SD Card Usage Notes
General
SD Card files may be lost/altered accidentally. Keep a copy
of contacts, etc. in a separate place. SoftBank Mobile is
not liable for any damages resulting from accidental loss/
alteration of information.
・Never power off while files are being accessed.
microSDXC Card
Handset supports microSDXC Cards (SDXC-compatible SD
Cards). microSDXC Cards are supported by SDXC-compatible
devices only.
Exchanging Files with Non-SDXC-Compatible
Devices
To exchange files between handset and non-SDXC-
compatible devices, use SD Cards (microSD/microSDHC
Cards) supported by handset and those devices. Inserting
microSDXC Card used on handset in non-SDXC-compatible
devices may corrupt card files. In such cases, do not
format the microSDXC Card on those devices even if
prompted to do so.
・Formatting deletes all microSDXC Card files and changes
the file system. The original memory capacity may be
unavailable after formatting. To use corrupted microSDXC
Card, format it on SDXC-compatible devices.
General Use
Keep SD Card out of infants' reach; may cause choking if
swallowed.

Charging Handset

Battery is built into handset.
AC Charger, Micro USB Cable, Micro USB Charging Adapter
(optional accessory) and In-Car Charger (optional accessory)
are not water or dust proof. Do not charge handset while it is
wet.
AC Charger
Use AC Charger (SHCEJ1).
・AC Charger and Micro USB Charging Adapter are not water
or dust proof. Do not charge Battery while handset is wet.
Open External Device Port Cover (hereafter "Port Cover")
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Plug AC Charger into AC outlet after rotating blades out as
shown
Notification Lamp illuminates while charging, and goes out
when charge is full.
Unplug AC Charger and retract blades
Remove Micro USB plug from External Device Port