Rotating The Monitor - BenQ BL Series User Manual

Rotating the monitor

1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90 degrees.
Click to launch the Display Pilot Software (if installed from the CD), and check Auto Pivot to set the
display to rotate with the monitor automatically.
Alternatively, right-click the desktop and select Screen resolution from the popup menu. Select
Portrait in Orientation, and apply the setting.
Depending on the operation system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operation system for details.
2. Pivot the OSD menu.
Once the display is rotated, you also need to rotate the OSD menu.
Go to Display and Auto Pivot. Select On. The OSD menu rotates with the monitor.
3. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
4. Rotate the monitor 90 degrees clockwise as
illustrated.
How to assemble your monitor hardware 15