Table of Contents
Advertisement
Messages
The following messages may appear or
flash during operation.
DISC ERR
You have set a disc that cannot be played
back on this system, such as CD-ROM, or
tried to play an unplayable file.
COMPLETE
The station preset operation ended
normally.
LOCKED
The tray lock feature is activated.
NO USB
No USB device is connected, the connected
USB device has been removed, or the
system does not support the USB device.
NO DISC
There is no disc in the player, or you have
set a disc that cannot be loaded.
NO FILE
There are not playable files on the USB
device or disc.
OVER CURRENT
The system detects an overcurrent in a
connected USB device.
Remove the USB device from the port and
turn off the system then turn on the system.
LOADING
The system is loading the information on
the disc. Some buttons do not work during
loading.
SEARCH
The system is searching the information on
the USB device. Some buttons do not work
during searching.
TIME NG
The Play Timer start and end times are set to
the same time.
34
GB
Hide quick links:
Advertisement
Table of Contents
