D-Link DSL-526B User Manual page 15

Section 2 – Installation
3. Click Finish to complete the InstallShield wizard.
When the USB driver has been installed carry out the following steps:
1. Insert one end of the USB cable included with the Router into the DSL-526B Router's USB port.
2. Insert the other end of the USB cable into a spare USB port on your PC.
3. Connect the power adapter to the power input in the back panel of the DSL-526B and then plug the other end of the power adapter to a wall
outlet or power strip.
4. Press the power button to switch on the Router. On the front of the device, the Power LED will turn ON to indicate proper operation.
5. Insert the telephone cable included with the Router into the ADSL port, and then connect the cable to your telephone line.
6. Check the DSL LED on the front of the Router to confirm that the connections have been made.
D-Link DSL-526B User Manual 14