Adjusting The Airflow Direction - Daikin FWXV15AVEB Service Manual

SiBE611027_A
2.3

Adjusting the Airflow Direction

Adjusting the Airflow Direction

You can adjust the airflow direction to increase your comfort.
To start auto swing
Upper and lower airflow direction
Press
• " " is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
To set the flap at desired
position
• This function is effective while flap is in auto
swing mode.
Press
the desired position.
• The flap will stop moving.
• " " disappears from the LCD.
To adjust the louvers
(vertical blades)
• Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
NOTE
Note on flap and louvers angle
• Unless "SWING" is selected, you should set the
flap at a near-horizontal angle in HEAT operation
and at a upward position in COOL operation to
obtain the best performance.
• During COOL operation, the range within which the
flap swings differs from the range within which the
flap can be fixed.
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
12
Operation Manual
.
when the flap has reached
HEAT
COOL
Operation Manual
24