Vertex Standard VX-510 Operating Manual page 18

Below is a table of radio features that can be customized by dealer pro-
gramming. To change a feature as your requirements change, contact your
Yaesu dealer. For future reference, check the box next to the option that
has been programmed in your particular radio, and keep it handy.
Feature
 Enabled
Channel
 Disabled
Scan
 5-seconds
Scan-Stop
 Carrier
Resume
 Enabled
User-Scan
 Disabled
Program
 Enabled
Dual
 Disabled
Watch
 Priority Ch.
Channel
 Home Ch.
after PTT
 Last-Busy
 Enabled
Monitor
 Disabled
A/B Button See Table
C
USTOM
Options
Channel scanning can be disabled
completely for systems not requiring this
feature.
In the 5-seconds mode, scanning pauses
on a busy channel for 5 seconds, then
resumes.
In the Carrier mode, scanning pauses and
remains on a busy channel until the
station stops transmitting.
If enabled, the user can program which
channels are to be scanned; otherwise,
dealer-programmable only.
Dual-Watch can be disabled completely for
systems not requiring this feature.
If the PTT is pressed during scanning,
determines which default channel the radio
returns to : the selected Priority Channel,
a designated "Home" Channel, or the
channel that was last-busy.
Enable/Disable the side-panel MON RES
button (See pages 6 & 9).
Flexible dealer-programming as outlined in
the table on the previous page.
VX-510 O
S
ETTINGS
Explanation
M
PERATING ANUAL
15