Browsing The Data Field; Display During Motorway Driving - Pioneer AVIC-F130 Owner's Manual

How to use the map

Browsing the data field

The data fields are different when you are navi-
gating the current route and when you have
no specified destination (the orange line is not
displayed). The data field provides the follow-
ing information.
! When the route is set:
Distance to final destination, time needed
to reach the final destination and estimated
arrival time
! When the route is not set:
Current speed, speed limit of the current
road and current time
p The estimated time of arrival is an ideal
value calculated based on the value set for
"Max. Speed" and the actual driving
speed. The estimated time of arrival is only
a reference value, and does not guarantee
arrival at that time.
= For details, refer to Setting the vehicle
parameters on page 43.
p You can change the value by touching and
holding any of the fields.
Display during motorway
driving
In certain locations of the motorway, lane in-
formation is available, indicating the recom-
mended lane to be in to easily manoeuvre the
next guidance.
Lane information
While driving on the motorway, motorway exit
numbers and motorway signs may be dis-
played in the vicinity of interchanges and
exits.
If you are approaching a complex intersection
and the needed information exists, the map is
replaced with a 3D view of the junction.
Signposts
Junction view
p If the data for these items is not contained
in the map data, the information is not
available even if there are signs on the ac-
tual road.
Chapter
05
25
Engb