Engine Overheats - Volvo Penta 3.0GLP-C Owner's Manual

Troubleshooting
Engine Noises and
Vibrations (Cont.)

Engine Overheats

108
Cooling System
Supply pump.
Loose belts and/or pulleys.
See Cooling System on page 84.
Mountings
Loose, broken, or worn engine mounts.
Loose lag screws holding mounts to stringer.
Crankshaft Balancer or Flywheel
Loose bolt(s).
Alternator
Loose pulley and/or worn bearings.
Loose mounting bolts.
Sterndrive
Failed U–joints or gimbal bearing.
Damaged internal drive components.
Worn, bent, or broken propeller hub or blades.
Loose, worn, or damaged engine coupler.
Check:
Actual engine temperature by verifying with an accurate thermome-
ter.
Gauge operation and wiring circuit.
Sending unit operation and wiring circuit.
Supply pump, circulating pump, and belt(s).
Water intake screens–for blockage.
Thermostat.
Water supply hoses.
Engine timing.
Water leaks on pressure side of supply pump.
Air leaks on suction side of supply pump.
Engine compression.
VPA 7743722 English 10-2004