Making a Call
To access the dialing page, press the SPK key or related line key, or pick up the
handset.
Direct dial: Enter a number and press the soft key <Send> or the <OK> key.
Redial: Press the <RD> key to access the page displaying numbers that you have
dialed. Select a record and press the <RD> key again.
Call-record-based dial: Press the soft key <Pool>. On the Pool page that is
displayed, press the up or down key to select a type and a record, and then press the
soft key <Send> or <Dial>.
Answering a Call
To answer an incoming call in the standby state, press the <SPK> key, pick up the
handset, or press the key <Headset> or the soft key <Answer>.
Rejecting a Call
To reject a call, directly press the soft key <Reject> or <X>.
Holding a Call
To hold an ongoing call, press the <Hold> key. If you want to cancel the holding,
proceed as follows:
When only one call is held, press the <Hold> key again.
When multiple calls are held, press the up or down key to select a call that you want
to unhold, and press the <Hold> key again.
Transferring a Call
The eSpace 7830 supports the following call transfer modes: blind transfer,
semi-consultation transfer, and consultation transfer.Assume that user A wants to
transfer user B's call to user C. The procedure is as follows:
Step 1
During the conversation with user B, user A presses the <Transfer> key to
hold the call with user B.
Step 2
User A dials user C's number.
Step 3
User A performs call transfer.
9