During the call
Calling a second party
You are in the middle of a call with a party and you want to call a second party, inside or
outside the company.
1
Answering a second call
While talking with one party, you hear an audible signal: an external party is trying to call
you. You can answer this second call without cutting off the first call.
* 1 0
Switching between two parties
You want to successively switch between parties:
2
* Depending on the programming performed by the system operator.
18
R
1 - Press the
key.
-> Your other party is put on hold and hears an audible signal.
2 - Dial the number of the other party.
Note:
You can also access a stored number.
• If the called party does not answer, press the
keys to return to the party on hold.
-> The display shows the number or name of the party you are
talking to.
*
Press successively the following keys:
-> The other party is automatically put on hold.
You can talk to the second party whose identity is displayed on
the screen.
Note:
If you have programmed the multi-key or multi-line function
(refer to these chapters for more information), you can press the
programmed keys to answer the call and switch from one party to
the other.
R 2
• Press the
or
-> You talk alternately with each party, but they cannot
communicate with one another.
R * 1 0
key.
R1
or
or
.