AEG Loop Manual page 22

22
11.2.7 Rename the Handset
M
• Press and
M
• Press and
M
• Press and enter the name of your handset
M
• Press to confirm.
11.2.8 Set the Auto Answer
• If you turn on the Auto Answer, you can answer a call automatically
by just lifting the handset off the base or charger, without having to
press any key.
M
• Press and
M
• Press and
M
• Press and
M
• Press to confirm.
11.2.9 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of
the base station. It is used to protect your phone against unauthorised
use. The default system PIN code is 0000.
• In idle mode, press
M
• Press and
M
• Press to show OLD PIN? ----.
• Enter the current system PIN.
M
• Press then enter your new 4-digit system PIN.
M
• Press then enter your new 4-digit system PIN again.
NOTE
If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter your new system PIN again in Step 5.
• Press Mto confirm your new PIN.
11.3 Reset Your Phone
You can reset your phone to the default settings. After reset, all your
personal settings, call list entries and redial list entries will be deleted,
but your phonebook remains unchanged.
M
• Press and
M
• Press and you are requested to enter the 4-digit system PIN.
• Enter the 4-digit system PIN.
.
to select HS SETTINGS.
.
to select RENAME HS.
.
to select HS SETTINGS.
.
to select AUTO ANSWER.
.
to select ON or OFF.
M
.
and
.
to select CHANGE PIN.
.
to select DEFAULT.
to select BS SETTINGS.