Removing The System Fan; Installing The System Fan; Removing The Display Bezel - Dell Latitude E7450 Owner's Manual

Hide thumbs Also See for Latitude E7450:
Table of Contents

Advertisement

Removing the System Fan

1.
Follow the procedures in
2.
Remove:
a.
battery
b.
base cover
3.
Perform the following steps as shown in the illustration:
a. Disconnect the system-fan cable from its connector on the system board [1].
b. Remove the screws that secure the system fan to the computer [2].
c. Remove the system fan from the computer [3].

Installing the System Fan

1.
Place the system fan into its slot on the computer.
2.
Tighten the screws to secure the system fan to the computer.
3.
Connect the system-fan cable to the computer.
4.
Install:
a.
base cover
b.
battery
5.
Follow the procedures in

Removing the Display Bezel

1.
Follow the procedures in
2.
Remove the battery.
3.
Pry the edges to release the display bezel from the display assembly.
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
computer.
Computer.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents