Installing the Coin-Cell Battery
1.
Insert the coin-cell battery to its place on the computer.
2.
Connect the coin-cell battery cable to its connector on the system board.
3.
Install:
a.
base cover
b.
battery
4.
Follow the procedures in
Removing the WWAN Card
1.
Follow the procedures in
2.
Remove:
a.
battery
b.
base cover
3.
Perform the following steps as shown in the illustration:
a. Disconnect the WWAN cables from their connectors on the WWAN card [1].
b. Remove the screw that secures the WWAN card to the computer [2].
c. Remove the WWAN card from the computer [3].
After Working Inside Your
Before Working Inside Your
computer.
Computer.
15