Sony DAV-DZ820KW Operating Instructions Manual page 25

2
Install 2 commercially available screws in
the wall so that it protrudes 4 mm (
Install the screws 30 mm
30 mm
3
(1 /
16
3
4 mm ( / inch)
16
3
Hang the IR transmitter via hole on the
bottom of the stand on the screw.
Make sure that the IR transmitter does not
move after installation.
IR transmitter
Stand
Tip
• You can store the cords in the troughs in the bottom
of the stand.
3
/ inch).
16
3
apart.
(1 / inch)
16
inch)
Stand
Troughs
Note
• Use screws suitable for the material and strength of
the wall.
• Do not install the IR transmitter to a wall of low
strength.
• Sony is not liable for any damage or accident incurred
by incorrect installation (i.e. low strength wall, etc.),
incorrect use of this product, or natural disaster.
• When connecting/disconnecting the cord, detach the
IR transmitter from the wall first.
25
GB