Table of Contents
Advertisement
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV/VCR 1 jacks on
the rear of the unit or to the AUDIO IN jack on
the front panel. This is not a malfunction and
will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
Press FUNCTION +/– repeatedly until
“TV/VCR1” or “AUDIO” appears in the
front panel display.
2
Press AMP MENU.
3
Press X/x repeatedly until
“ATTENUATE” appears in the front
or c.
panel display, then press
4
Press X/x to select a setting.
• ATT ON: attenuates the input level. The
output level is changed.
• ATT OFF: normal input level.
5
Press
.
The setting is reflected.
6
Press AMP MENU.
The AMP menu turns off.
GB
Enjoying TV or VCR Sound
from All Speakers
You can enjoy TV or VCR sound from all the
speakers in this system.
For details, see “TV Hookup (Advanced)”
(page 26) and “Other Component Hookup”
(page 30).
SOUND
FIELD
FUNCTION
+/–
1
Press FUNCTION +/– repeatedly until
“TV/VCR1” or “TV/VCR2” appears in
the front panel display.
2
Press SOUND FIELD repeatedly until
the sound field you want appears in the
front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
6 speakers, select the “PRO LOGIC,” “PLII
MOVIE,” or “PLII MUSIC” sound field.
For details of sound field, see page 36.
Note
• When you use both the TV/VCR 1 (AUDIO IN) jacks
(analog connection) and TV/VCR 1 (DIGITAL IN
OPTICAL) jack (digital connection) at the same time,
the digital connection takes priority.
Page 34
Hide quick links:
Advertisement
Table of Contents
