Sony DAV-DZ820KW Operating Instructions Manual page 21

10
Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press X/x to select [YES], then press
.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
A.CAL MIC
Calibration mic
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
11
Unplug the calibration mic and press C/
c to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Measurement complete.
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
YES.
YES
Note
• Reflections from walls or the floor may affect
measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To quit the Quick Setup
Press DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See "Getting Optimal Surround
Sound for a Room" (page 77) and "Calibrating the
Appropriate Settings Automatically" (page 79).
• If you want to change any of the settings, see "Using
the Setup Display" (page 81).
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu appears.
2
Press X/x to select
press .
The options for [SETUP] appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
: :
QUICK
QUICK
CUSTOM
RESET
BNR
5.0m 0.0dB
5.0m 0.0dB
5.0m + 1.0dB
5.0m + 4.0dB
3.0m - 2.0dB
3.0m - 2.0dB
NO
[SETUP], then
DVD VIDEO
continued
21
GB