7. After the installation click Finish to exit the program.
8. Restart your computer to start using MGI PhotoSuite III SE.
Making Connections
Connecting to your PC
Note: Ensure that you have installed the iQuest Roam TWAIN driver
before connecting to your PC.
Use the supplied USB cable to connect your iQuest Roam to your PC. Refer to the
following instructions:
1. Plug the large end of the USB cable into the USB port on your computer.
2. Connect the other end of the USB cable into the iQuest Roam camera.
3. Turn on your camera.
After you have connected your camera to your computer, the LCD status displays
as shown:
22