Camera Setup And Operation; Taking Pictures; Using The Macro Function - quest roam SiPix Owner's Manual

Camera Setup and Operation

Taking Pictures

Follow these instructions to take a picture with your iQuest Roam camera:
1. Press the Power Button to turn on the camera. When the Standby LED stops
flashing, the camera is ready to take a picture.
2. Center the subject in the Optical Viewfinder.
3. Press the Shutter Button to take the picture. You should hear a beep as the
picture is taken. The LCD Display indicates the number of pictures you have taken.
Note: When the memory is full, you will hear long beeps as you press the
Shutter Button to take a picture.

Using the Macro Function

Enable the Macro Function for close-up photography between 12 and 20 inches
from the subject.
1. Change the lens ring from Normal
2. Ensure that the Standby LED has stopped flashing and align the picture through
the Viewfinder.
3. Press the Shutter Button to take the picture.
to Macro .
10