Setting The Self-Timer - quest roam SiPix Owner's Manual

Setting the Self-timer

The Self-timer enables you to include yourself in the picture. Follow these
instructions to use the self-timer:
1. Press the Mode Button and scroll through the modes until you reach the
Self-timer Mode.
2. Use the Up and Down Buttons to alternate between the On and Off setting.
3. Choose On and press the Mode Button again to activate the Self-timer.
4. Align your shot through the Viewfinder.
5. Press the Shutter Button. You now have ten seconds to move to your location
for the picture.
6. The Self-timer LED blinks red:
7. After seven seconds, the Self-timer LED emits a rapid blinking red light for three
seconds to alert you to prepare for the shot. After three seconds, the picture
is taken.
The Self-Timer LED starts blinking
after you press the Shutter Button
12