Installing Mgi Photosuite Iii Se - quest roam SiPix Owner's Manual

6. Review to ensure video is working and click "Yes."
7. Enter your registration code and click "Register."
8. Review registration information and click "OK."

Installing MGI PhotoSuite III SE

1. Insert the MGI PhotoSuite III SE CD into your CD-ROM drive.
Note: If the screen doesn't appear, click Start, and then click Run. In the Open box,
type "D:\Setup.exe" where D is the letter of your CD-ROM drive. Then click OK to
open the screen.
2. Choose install MGI PhotoSuite III SE.
20