Download Print this page

Sanyo DC-LD5 Service Manual page 42

Midi component system with fully compatible disc player
Hide thumbs Also See for DC-LD5:

Advertisement

ii
b) Replacethe 30 cm discwith a 12 cm compact disc,then pressthe OPEN/CLOSE
key to closethe tray. Confirm that the LD and CD/CDV indicators flash sixtimes
,then the words TOC CHECKappear on the screen. Subsequently, the CD/CDV
indicator alone must light, then play must start automatically from the first track.
c) Pressthe ON SCREENkey 2 times. then REMAIN indicator must light on.
Next press the ON SCREENkey then confirm so that REMAIN indicator. go out and TOTAL
indicator.
light on. Once again press the ON SCREENkey ,TOTAL indicator. must go out.
I. Specialinspection
1) Remote control inspection
a) Pressthe PRGRAM key of the remote control ler,then the PROGRAM indicator must Iight on,
b) Pressthe CLEAR key of the remote control ler,then the PROGRAM indicator must go out.
2) Syncro record inspection
a) Pressthe OPEN/CLOSEkey to open the disc tray.
b) Insert the cassette tape to the Deck 2, then turn to the REC/PAUSE.
c) Confirm that the KARAOKE sw is set to MUSIC,then pressthe OPEN/CLOSEkey to close
the disc tray.
d) The deck must start recording after both the LD and CD/CDV indicator have flash
8 times.
e) Pressing the PLAY/PAUSE key on the set must cause the RECJPAUSE mode in the deck.
f)
Pressing
the
PLAY/PAUSE
key once
again
must
cause
the
REC/PAUSE
mode in the deck
,then the
MDP
becomes
to
PIAY
mode.
g) ;~e CHAPTERSTOP indicator must light when the KAW40KE sw is set to the KARAOKE
A pause or play operation of the MDP must take place without any response from the
deck, even when the above operation is carried out.
Confirm so that the KARAOKE sw is setto MUSIC,then the CHAPTERSTOP indicator go
out.
3) Disc protect inspection
a)The power to the MDP must be cut off immediately
function selector set to tuner.
b) Pressthe LD/CD sw so that the function selector set
key to open the disc tray.
when the tuner sw is pressed and the
to LD/CD,then press the OPEN/CLOSE
c)
Remove the 12 cm disc, replace it with the
30
cm
disc,then press the OPEN/CLOSEkey to
close
the
disc tray.
d) When the words DISC CHECK appear on the screen,press the tuner SW.The tuner indicator
must light. Also the power to the MDP must remain on for about one to three seconds
but the tuner output must not be emitted from the speaker during this period.
e) Pressthe LD/CD sw so that the function selector set to LD/CD,then play the 30 cm disc.
f) By pressing the power SW,fluorescent tube(FL). must go out immediately, however the power
to the MDP must remain on for about eight to eleven seconds.
g) Pressthe power sw on,then press the OPEN/CLOSEsw to open the disc tray,and remove the
30 cm disc.
h) Pressthe OPEN/CLOSEsw to close the disc tray,then press the power sw when the following
indication appears on the screen.The FL must go out and also the power to the MDP must
be cut off immediately.
DISC CHECK light on+ CD/CDV/LD flushing+ CD/CDV/LD light on
,,,
8
–51–
..,,.,
,,

Advertisement

loading